Professional PowEPTCoating for Radiator
1.EPT introduction:
Our firm is a manufacturer EPTized in the study deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and production of thermosetting powEPTcoating for far more than twenty several years. Our business generate and deal with all kinds of thermosetting powEPTcoating incXiHu (West Lake) Dis.Hu (West Lake) Dis. epoxy polyester, pure polyester and so on. In accordance to the requirements of clients, we can create diverse hues or diverse functionality of the thermosetting powEPTcoating. As a consequence of our high quality products and outstXiHu (West Lake) Dis.Hu (West Lake) Dis. client provider, we have estabEPTd the relationships with a lot of nicely-identified EPTrprises at residence and abrord. If you are fascinated in any of our merchandise or would like to go over a custom made buy, you should truly feel free to make contact with us and welcome to XiHu (West Lake) Dis.Hu (West Lake) Dis.. We are searching EPT to forming profitable company associations with new clientele around the planet in the potential.
two.Solution collection:
We Provide large ligEPT (earlier mentioned 86%), plain glass(seventy six-85%), matt (20-50%) and reduced ligEPT (beneath twenty%) of the entire-shade powEPTcoatings items.Gloss can also be controlled according to the user’s demands.
three.EPT:
Carton EPT, lined with double polyethylene bag, internet weigEPT 20 kg.
four.Storage needs:
Store below 30 degC, ventilated, dry, thoroughly clean place, not near the fire, warmth, immediate daylight, open up dumps is prohibited.UnEPTthis issue, the powder can be steady for twelve months, much more than the storage period could be re-examined, this kind of as the results fulfill the specifications, can even now be utilized.
five.PowEPTphysical homes:
Proportion : one.1-1.8 (depending on the shade and gloss )
Particle dimension distribution: a hundred% significantly less than 125 microns(much more than eighty five% between
sixty-90).
Liquidity:18~35mm.
Curing conditions:180 degC,15minutes.
6.Well being and basic safety:
This product is non-toXiHu (West Lake) Dis.c. In the training course of inhalation of dust ought to be prevented. The operators must put on appropriate dust mask and eyeglasses.
7.Coating efficiency
| Coating efficiency | ||||
| Take a look at items | Inspection stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds | Take a look at indicators | ||
| Higher gentle | Glazed/Matte/Reduced mild | |||
| EPEPTct resistance | ISO6272 | GB/T1732-1993 | 50kg/cm | 40kg/cm |
| Cupping examination | ISO1520 | GB/T9753-1988 | 8mm | 7mm |
| The adhesion (grid strategy) | ISO2409 | GB/T9286-1998 | ||
| Bending | ISO1519 | GB/T6742-1986 | 2mm | 3mm |
| Pencil Hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H | |
| Salt spray test | ISO7253 | GB/T1771-1991 | gt500 hours | |
| Moist heat take a look at | ISO6270 | GB/T1740-1979 | gt1000 hrs | |
| Heat resistance | a hundred and ten degC/24 several hours(white) | Excellent gloss retention,E le0.3-.four | ||
| Florida weathering publicity | ISO2810 | South 45 deg,12mons | Gloss retention ge50% | |
| Synthetic accelerated getting older | 60 degC/8hours + fifty degC/4hours condensing,cycle for 500hours | Gloss retention ge50% Shade balance:E le0.35 | ||
| Annotate: | 1.The over experiment uses .8mm metal with degreasing and rusting, and the coating thickness are 50-70 microns. | |||
| two.The previously mentioned coating efficiency might be lower as shiny and slightly decrease. | ||||
8.Why decide on our goods?
one). We have our personal factory. The very good high quality and the aggressive is the benefit of our firm.
2). The content we choose is often great and goods usually appear out with high high quality.
three). A demo buy or sample orders are welcomed.
4). Our merchandise are exported to Europe, The us, Southeast Asia, and other countries and regions in the globe.
five). We will do our very best to support you all the time if you have the additional issue.
