Utilised Tire ShredEPTRubber Block Generating EPT
The EPT tire recycling EPT will be managed by the PLC, all the components will be approach inside of EPTs, there is Genuine ZERO Pollution. 1 labor, one engineer can run all the EPTs, no need to function the EPTs, just handle the PLC. the EPTs can shield the EPTs, function the EPTs and hold the EPTs function effortlessly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automated manage method, with automated reversal management system in overload situation. Two-shaft tire crusher is EPTly made for previous tires with low speed and higher torque to reduce sound and EPT use.
The blade of the shredEPTis produced of substantial good quality metal and subjected to Bodycote warmth remedy to obtain the ideal crushing functionality.The shredEPTis effortless to disassemble and adjust cutter blade and suited for tearing big, added thick and challenging materials.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire type,output and final merchandise. The grinEPTcan method OTR tires,huge truck tires,car tires and so on at the speed of one-30tons whithin one hour.
| Design | Enter dimensions | Output dimension | Cappacity | Motor | Blades quantity | Dimensions | Bodyweight |
| TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | four*2.six*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | two*37kw | 20pcs | 4.eight*2.eight*3.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | 6-8T/h | 2*45kw | 16-30pcs | five*two*3.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | two*55kw | 20-24pcs | five.six*two*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | two*75kw | 20-30pcs | six*2.4*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | twenty-30T/h | 2*110kw | 16-24pcs | seven.4*three.two*5.2m | 56T |
two.Rasper
EPT tire shredding system is designed to make up to six tons for each hour of wire free rubber mulch.This program makes up to a ninety nine% wire free of charge chip ranging in dimensions between twelve-25mm depending on the wanted measurement.Following processing,the steel is taken off by our magnetic separation program.At this stage,the wire totally free rubber chips are prepared to be coloured and utilized for landscaping mulch and the metal is completely ready to be baled and offered to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Bodyweight | Chopping chamber | Closing product |
| R45 | Siemens | 45KW | 300-500kg/H | 1.four*1.two*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.7*1.seven*two.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | 2*two*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.1*2.one*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.five-3T/H | 2*2.five*four.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.two*two.one*three.6m | 12400kg | 697*1562mm | ten-30mm |
3.Granulator EPT
Waste Tire Recycling Rubber Granule Making EPT is adopting physical recycling approach and is created to grind the rubber mulch from the rasper into tiny granules as fine as 1-6mm. The granules are screened and re-circulated till the preferred size is attained. This Fully-Automatic Tyre Recycling Line running in normal temperature, no need to insert any other substances, no air pollution to the atmosphere. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capability | 300-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.six*two.4m | 1.eight*one.9*two.4m | 2.two*two.three*3m |
| Ultimate solution | one-6mm | one-6mm | one-6mm |
4.Miller
Rubber powEPTis the closing end result of ambient tire recycling.At this stage,crumb rubber is floor down into a thoroughly clean powEPTform with nearly all metal and fiber removed.Rubber powEPThas several secondary uses from injection molding merchandise,coatings,roofing resources and different asphaltapplications.
Rubber powEPTis typically located in forty-seventy four microns(.forty-.74mm) in measurement.This micron size metarial has the edge of currently being incorporated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and concluded goods.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input item | Weighty responsibility truck tyres to bicycle tyres | |||
| Input dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimension | shred to 30-120 mesh rubber powder | |||
| Capacity | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a factory or a buying and selling company?
A. We are a manufacturer with 30 years creation knowledge in tire recycling EPT. We have export license, we can provide you the manufacturing unit rates.
Q2. Can you promise the capability as you mentioned ?
A. Undoubtedly yes,besides that,we also give three-5years guarantee.
Q3, are you sure the final rubber powEPTcan be fully clear out of wire metal or nylon ?
A. The ultimate powEPTpurity can reach 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
