Rubber PowEPTProduction of Waste Tire Recycling
The EPT Procedure:
hydraulic system, easy operation and secure.
Mechanical description: the tires much more than 800 want to lower, and cut into 4 pieces in EPT .the dimensions of piece is 200-500mm.
Notes for using tire cutter:
a. Examine the knives frequently, if seem obvious blunt, it need to be sustain well timed, and the services is two-3 several years.
b. the oil in hydraulic station need to be filtered and altered regularly. EPTly filter as soon as each and every one particular and fifty percent yr.
c. Sporting areas: rubber seals, delivered with another established when ship the EPT to the customer.
EPT tire shredEPTZPS-900
Use:
This EPT can immediately crush tires scaled-down than 800mm tires. At the EPT temperature, can be put right crushed into fifty * fifty mm block, so the subsequent rotating can grind into ten-thirty meshes or wire and fiber separation tools.
Attribute:
This EPT is a compact construction, superior technological innovation, reduced strength consumption, higher efficiency, smashing off the examination place for the structure, routine maintenance is particularly convenient instruments with carbide surfacing technological innovation, substantial hardness, high use resistance, and recurring fix employing, so has a EPTer support daily life rotary display screen for the lattice composition of steel mesh, blanking huge location, enabling the screening of experienced rubber. Following the partition of large tires can attain the impact of the same!
Mechanical description: the tires of 800mm diameter and rubber ring can directly be broken into fifty*50 mm of rubber block.
Notes for utilizing EPT tire shredder:
a. Inject equipment oil into EPT oil (hypoid equipment oil), major bearings use calcium-dependent grease lubrication, 3 months following the procedure of the EPT, the oil should be replaced and clear the fuel tank. Given that then alter the oil after time every single calendar year.
b Following deal with 3,000 tons of squander rubber (in regular situation),the purchaser should grind the blade chopping edge after time. The blades is the dress in components, the EPT support existence is 5-6 several years, when providing the EPT to the buyer, the shredEPTwill be geared up with edge hardness layer patching material (electrodes).
Double Rolls Rubber Crusher XKP-560
Use:
Largely employed for crack big rubber blocks into forty-50mm tiny rubber blocks.
Technological parameters:
Framework: The rollers undertake alloy cold difficult forged irons with dress in-resisting, tough characters. The mill flour is with enamel, high groove.
In orEPTto extend the support daily life of the cracker, we propose construct foundations for rubber cracker.
The configurations of our XKP-560 rubber cracker are nylon bush grease lubrication and hard equipment area EPT with decrease sounds and EPTer support life.
5Our crackers are designed XiHu (West Lake) Dis.Hu (West Lake) Dis.nized with nice working platforms, all the wires will be linked well from controlling method to motor. When utilizing the EPT, the buyers just want to hook up straight to the EPT.
Rubber PowEPTProduction of Waste Tire Recycling
No. | Identify | Product | Qty. (Qty) |
Motor EPT (KW) | ||
1 | One hook debeader | LSJ-1200 | one | 11 | ||
two | EPT tyre cutter | QDJ-1200 | 1 | 5.five | ||
3 amp4 | EPT tyre shredder (with conveyor) |
ZPS-900 | 1 | 61.5 | ||
five | Double Rolls Rubber Crusher | XKP560 | one | 90 | ||
six | Huge conveyor equipment | BCL-eight | one | 2 | ||
seven | Modest conveyor gear | BCL-3 | one | 1.1 | ||
eight | Huge Magnet separator | BMS22 | 1 | two.2 | ||
nine | Tiny Magnet separator | SMS-one | 1 | one.1 | ||
ten | Massive Shaking monitor | BSS-8 | 1 | 7.5 | ||
eleven | Little Shaking display screen | SSS-3 | one | three | ||
12 | Fiber separator | FS110 | one | 5.5 | ||
thirteen | Fine Rubber Powder Pulverizing EPT | XJFS-420 | 4 | 123 | ||
Sq. vibrating sieve | 600 | 1 | ||||
Rubber powder collector | JFS500 | one | 7.5+.seventy five=8.25 | |||
Screw conveyer | Phi200mm | 1 | .75 | |||
Screw conveyer | Phi132mm | one | .75 | |||
Storage pin | 1.5cbm | one | ||||
Hopper | one | |||||
Belt conveyer | 1 | .seventy five | ||||
14 | Steel Baller EPT | 30T | one | 7.5 | ||
fifteen | Rubber powder EPT EPT | 1 | three | |||
24 | 334.4KW |
Welcome your inquiry and visiting our factory!