FSEKO has been in the area of lamination film for over ten several years. The Lamnition Movies are SGS examined with the acceptance of patent. And the quality is managed by the good quality technique ISO 9001: 2008.
Surface layer: BOPP
Glue layer: EVA adhesive
Paper core: 25.4mm (one inch), 58mm(2.25inches), 76mm(three inches)
Bonding: Much less than two
Gear for thermal movie: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: ten-20mpa
Speed: eight-20 m/min
*directions for using BOPP thermal laminating movie:
Typical approach temperature is 90c-105c, roller pressure and temperature vary with distinct sorts of paper, ink and EPTs.
When using the movie for the 1st time or do other remedy, consider a tiny quantity before mass laminating.
Make certain the ink is dry ahead of laminating. It will delaminate when the paper includes also considerably moisture and powder.
Make confident set the content in a reduced-temperature, dry area.
|SPECIFICATION||35 micron GLOSS||35 micronMATT|
|WEIGEPT||m sup2 /kg||30.63||31.65|
|kg/m sup2||.03265||. 0571|
|Width||300 – 1800 mm
On customer’ s requirement
|Size||200 – three, 000M(much more or significantly less 10% allowed)|
|CoronaTreatment Side||1 Side||Each Facet|
|Connector||Significantly less than two|